HK style roller chains

Downsizing Your Program with Greater Electrical power Chains
HK sort roller chains conform to H form of ANSI, and their thickness of inner and outer website link plates are equal to individuals in the following larger size chain. For that reason, HK form roller chains are higher in tensile power by about 20%and in greatest allowable load by about 15% than individuals of standard roller chains. Since the fat in the chains is additionally bigger, HK style roller chains are appropriate for that application of hefty duty at very low velocity.
Proposed uses
?Optimal for spots wherever increased strength is needed but huge and heavier chains are unable to be used.
Collection of chains
Decide on a proper HK kind roller chain based on “Low-speed selection”
To the highest allowable load, see the next table of dimensions.
HK variety roller chains can be found up to triplex.
Sprockets
Use common sprockets for any simplex HK roller chain Because the transverse pitches are greater than these of typical chains while in the situation of duplex or triplex, common sprockets are unable to be utilised. Refer to the sprocket tooth profiles for HK
Connecting link and offset website link
The tensile power of connecting back links and offset backlinks are listed about the left, however the maximum allowable load is reduced than that with the base chain. Please seek advice from us must you have got any questions. It really is proposed to make use of the connecting website link of interference-fitted (FJ, HJ)
In no way make the holes with the connecting plate more substantial and under no circumstances make the pins thinner to facilitate the operate for fitting the pins in to the connecting plate, considering the fact that otherwise the fatigue power will probably be lowered.
Variety of chains
Select a correct HK kind roller chain depending on “Low-speed selection”
To the greatest allowable load, see the following table of dimensions.
HK kind roller chains are available as much as triplex.
Sprockets
Use normal sprockets for a simplex HK roller chain Since the transverse pitches are more substantial than those of normal chains while in the case of duplex or triplex, standard sprockets are unable to be made use of. Refer to your sprocket tooth profiles for HK
Connecting link and offset website link
The tensile power of connecting backlinks and offset hyperlinks are listed to the left, however the greatest allowable load is decrease than that of your base chain. Please talk to us ought to you have got any queries. It is recommended to implement the connecting link of interference-fitted (FJ, HJ)
Never make the holes of your connecting plate larger and in no way make the pins thinner to facilitate the work for fitting the pins to the connecting plate, due to the fact otherwise the fatigue strength will be lowered.