Materials Dealing with Energy UNIT one
General Description
This electrical power unit is made for your fork lift market, consisting of very effective gear pump, DC motor, manual raise and lower valve, tank, ect. The up and down motion are controlled by the lever in the manual release valve, which can be equipped with an electrical switch to activate the motor. The lowing pace is managed from the stress compensated flow handle valve.
Specific Notes
1. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean each of the hydraulic components concerned in advance of set up of the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which should also be clean and free of charge of impurities, N46 hydraulic oil is recommended .
4. Oil shifting is needed right after the preliminary a hundred operation hrs, afterwards once each and every 3000 hrs.
5. The power unit shown is made to be mounted horizontally.

Material Dealing with Electrical power UNIT 2
Standard Description
This power unit options power up gravity down circuit. Activate the start solenoid to begin the motor to lift the machine. The lowing movement is activated from the solenoid valve using the reducing pace managed by the stress compensated flow handle valve. Products of this series is usually extensively utilized in the industry of logistic gadgets for example fork lift, mini lift table, and so forth.
Specific Notes
1. The duty of this power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean all the hydraulic elements concerned before mounting the power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which should really also be clean and totally free of impurities, N46 hydraulic oil is recommended .
4. Oil transforming is required after the first one hundred operation hours,afterwards once each and every 3000 hours.
5. The power unit must be mounted horizontally.