The positioning screw fixed plum coupling is also called a claw coupling, which is composed of two metal claw discs and an elastic body.The two metal claws are made of No. 45 steel, but aluminum alloy or stainless steel is also used when load sensitivity is required. ...
Torx coupling is a mechanical component that is mainly used to connect two rotating shafts in mechanical transmission to transmit torque or rotation angle. It can also be used for equipment protection of safety devices. ...
When installing the equipment, whether the coupling that connects the two shafts is kept on the same axis, which has a great impact on the service life of the coupling and the transmission device.Failure to install and adjust as required, so that the relative offset of the two shaft axes exceeds the allowable value of the coupling, is caused...
The coupling may be damaged if it is used improperly during disassembly. In fact, the most difficult thing is to remove the hub from the shaft. For the keyed hub, the individual uses a three-legged puller or a four-legged puller to remove the coupling. . ...
Please pay attention to the following points when installing the diaphragm coupling: 1. Products with diaphragm have edges and may cause injury. It is recommended to wear thick gloves during installation; 2. Please install a protective cover around the coupling Wait for the device to ensure safety; 3. The axis deviation during installation exceeds...