The bolt is an important core component of the diaphragm coupling. Whether it is installed correctly or not will directly affect the performance, life and safety of the product, otherwise it will cause a certain amount of waste of manpower and accessories. ...
The two shafts connected by the coupling are affected by many factors such as manufacturing error, installation error, deformation caused by shaft load, base deformation, bearing wear, temperature change (thermal expansion, cold contraction), relative movement between components, etc. Produce relative displacement. ...
To evaluate the machining quality of coupling gears, we must first look at the surface roughness of the teeth. The surface roughness of the teeth does not meet the technical requirements. Noise will occur during the transmission of the coupling gear, which will aggravate the wear of the tooth surface and affect the life of the gear. Therefore, we must pay attention to it. To study the surface roughness of teeth...
The main technical requirement for coupling assembly is to ensure the coaxiality of the two axes.Excessive concentricity error will cause additional loads on the coupling, drive shaft and its bearings. As a result, it will cause machine vibration, premature bearing wear, mechanical seal failure, and even...
The structure of the slider coupling is similar to that of the cross slider coupling, the difference is that the middle cross slider is a square slider.The slider coupling is also known as the metal cross slider coupling. Its slider is in the shape of a circular ring and is made of steel or wear-resistant alloy. It is suitable for cross slider coupling...
The Phillips slider coupling is fixed by clamping screws. The polyurethane plastic is used as the elastic element and the two-half coupling body is tightly combined. The main body is made of 45# steel. The middle polyurethane plastic element is formulated with a unique formula. High wear resistance, good temperature resistance, strong toughness, more than one...