Maintenance method of diaphragm coupling: 1. Before installation, clean the end faces of the two shafts and check the coordination of the key notches on the end faces; 2. After the elastic diaphragm coupling is installed, it is necessary to check all screws during normal operation for a shift, such as It is found to be loose and must be tightened. This...
Drum gear couplings have Type I and Type II, which are suitable for low-speed and heavy-duty conditions, such as metallurgy, mining, lifting and transportation industries, and also suitable for shaft transmission of various machinery such as petroleum, chemical, general machinery, etc. . ...
Elastic column pin coupling is used to connect the elastic column pin coupling of the master-slave shafting of power machinery.The spiral ring-shaped elastic body of the elastic column tip coupling formed by the multi-strand steel wire hinged wire fixed by the metal splint constitutes the annular free deformation space between the master and slave hubs of the coupling, and the connection...
The conditions to be considered before the universal coupling selection are as follows: 1. Whether there is a transmission device between the prime mover and the universal coupling.If there is a transmission ratio, it will be output by several shafts after passing through the intermediate transmission device, that is, whether there is power split.Considering the class of prime mover...
The GL roller chain coupling uses a common chain, which meshes with two parallel sprockets with the same number of teeth. The main difference between different structure types of chain couplings is that they use different chains. Common ones are double-row roller chain couplings. Shaft, single-row roller chain coupling, tooth profile...
Professional torque limiter, also known as safety clutch, safety coupling, is often used to install between the active and passive sides of the power transmission. When an overload fault occurs (torque exceeds the set value), the torque limiter will be separated... .